Suspension Tuning Guide

Best Suspension Upgrades for the Audi FV/8S TTS & TT RS (Road & Track Guide)

Unlock sharper handling from your Audi TTS and TT RS (FV/8S) with proven suspension upgrades. By increasing front camber and fitting adjustable coilovers, you can reduce understeer, improve steering feedback, and boost cornering grip. The result is a more balanced, responsive and confidence-inspiring sports car on road and track.

Best Suspension Upgrades for the Audi FV/8S TTS & TT RS (Road & Track Guide)

In this suspension tuning guide, we'll explain how to reduce understeer and unlock more cornering grip from the Audi TTS and TT RS (FV/8S). The following upgrades will also improve steering communication and enhance engagement.

The TTS and TT RS (FV/8S) are based on VAG's MQB platform. Powerful engine performance make them appealing sports cars, yet their handling on the road and track is underwhelming.

The great news is that bolt-on upgrades manufactured and supplied by Suspension Secrets cure these dynamic flaws. In this TTS and TT RS suspension tuning guide, we’ll explain how correcting front camber and uprating springs and dampers achieves superior cornering ability and boosts driving enjoyment.

Audi TTS suspension upgrades.

TTS/TT RS Suspension & Handling Overview

Audi launched its Mk3 TT in 2014 and manufactured it until 2023. Towards the top of the range sat the TTS model with two-litre, four-cylinder turbocharged engine producing 320hp. The range-topping TT RS boasted a 2.5-litre five-pot turbo developing 400hp.

Both the TTS and TT RS are based on VAG's modular MQB platform. Up front are MacPherson struts, and at the rear is a multi-link setup. The TTS and TT RS also feature Quattro all-wheel-drive.

TT Suspension Limitations

When driving a TTS or TT RS hard on the road or track, their MQB chassis quickly displays several issues. Common complaints include:

  • Front end understeer/push
  • Steering low on feedback and weighing
  • Underwhelming turn-in response
  • Excessive front tyre wear on track
  • Poor body control through transitions and during heavy braking

Without these problems, the TTS and TT RS would be epic driver's cars. There is significant untapped potential in these hot hatchbacks, and thanks to their powerful engines they become forces to be reckoned with following suspension upgrades...

Common Handling Problems (And How To Fix Them)

The Audi TTS and TT RS (FV/8S) suspension upgrades covered in this guide allow you to achieve the following...

1. Increase front camber and significantly reduce understeer
2. Improve the clarity and weight of steering communication
3. Enhance overall handling precision and consistency
4. Reduce the ride height and improve body control

Once these improvements have been made, the TTS and TT RS will feel far more stable, precise and responsive at higher speeds. They will also transmit grip levels to the driver with greater clarity, boosting overall confidence. 

Audi TTS TT RS suspension geometry alignment.

Suspension Geometry & Alignment Setup (Top Tip)

A full suspension geometry alignment is essential after installing new suspension parts. By correctly adjusting camber, toe, and caster (where available), alignment ensures you maximise grip, stability, and tyre life.

Benefits of a TT Geometry Setup

  • Sharper steering response
  • Increased cornering grip
  • Improved rear traction
  • Enhanced braking stability

A professional alignment is the single most cost-effective handling upgrade you can make.

Audi TTS TT RS suspension upgrades.

Audi TTS/RS Suspension Upgrades

This section covers essential Audi TTS and TT RS suspension upgrades that will deliver a new level of handling performance on the road and track. These bolt-on parts are perfect if you are craving more engagement, response and feedback from your TT.


Adjustable Camber & Caster Plates

ORDER CAMBER PLATES

In standard form, the FV/8S TTS TT RS do not offer enough front camber adjustment to achieve effective Fast Road or Track suspension geometry settings. This makes it difficult to significantly reduce the amount of understeer experienced at fast cornering speeds.

The Audi TTS/RS adjustable camber plates from Suspension Secrets have Fast Road and Track settings, and allow additional negative camber to be dialled into the front axle, significantly improving front-end grip and steering feel. 

Why TT Camber Plates Matter
  • Reduce understeer
  • Sharpen turn-in
  • Increase steering feedback
  • Improve tyre wear on track

Suspension Secrets camber plates also increase caster angle, providing dynamic camber gain as steering lock is applied. As well as further improving turn-in response, caster also enhances steering feel and weighting. An added bonus is that Suspension Secrets camber plates are fully compatible with aftermarket coilovers that use the OEM top mounts.

 

Adjustable Rear Toe Arms

ORDER TT TOE ARMS

The MQB platform’s multi-link rear suspension is a great foundation to work with, but the factory rear toe arms use soft rubber bushes that flex during hard cornering. This can make handling less consistent, particularly on lowered TT models.


Suspension Secrets Adjustable Rear Toe Arms offer:

  • Greater toe adjustment range than the OEM arms
  • Solid bearings to reduce unwanted movement under load
  • More precise rear alignment for road and track setups

Lowering an MQB car can make it difficult to achieve your perfect suspension settings. Our adjustable arms provide greater range to dial in the correct toe settings, while their solid-mounted design increases stability and precision.

Adjustable rear toe arms and front camber plates are an extremely effective starting point for TT drivers wanting improved handling performance on the road and track.


Adjustable Camber and Roll Centre Front Lower Ball Joints

UPGRADE TT BALL JOINTS

Lowering an MQB-platform car, such as the TTS or TT RS, changes the angles of its front suspension components. This can affect how the car handles through corners, increasing body roll and making it harder to maintain front grip. The standard setup also offers no factory front camber adjustment.


How Suspension Secrets Ball Joints Address These Issues:

  • Adjustable front suspension geometry to suit ride height
  • Additional negative front camber for improved cornering grip
  • Greater control over body roll and front end response
  • More scope to reduce understeer and improve chassis balance

Using 2mm shims above or below the bearings allows the lower control arm angle to be adjusted, restoring the geometry affected by the lowering. The part’s alternative mounting positions also move the bottom of the wheel outwards, adding negative camber.


Front Offset Caster Bushes

ORDER TT CASTER BUSHES

VAG cars based on the MQB platform do not offer much by way of steering feel, while front end response is a little lacking. Additional positive caster angle on the front axle benefits both turn-in (by generating more negative camber as the steering is turned) and also steering weight.


Suspension Secrets Front Offset Caster Bushes Provide:

  • Increased positive caster
  • Additional negative camber when steering
  • Reduced unwanted movement compared to standard rubber bushes
  • Improved steering precision and grip

Replacing the original bushes with solid offset rose joints reduces unwanted suspension movements (flexing) under load while changing the lower control arm position to increase caster. The result is a more responsive front end and more engaging steering weight.

 

Solid Front Lower Control Arm Bushes

UPGRADE TT BUSHES

The factory-fitted rubber bushes on MQB-platform cars are designed to provide comfort and absorb vibration. However, when driven hard on track they can flex under braking and through corners. This allows front camber and toe angles to change, making grip less consistent and the steering less precise.

Our Solid Front Lower Control Arm Bushes are designed primarily for performance and track-focused builds.


Key Benefits Include:

  • More consistent front wheel alignment under load
  • Improved cornering stability and grip
  • Greater steering precision
  • Better traction when accelerating out of corner
  • Motorsport-grade bearings

Replacing the original rubber bushes with solid-mounted bearings removes unwanted flex, meaning the front suspension maintains more consistent geometry during fast driving.


KW V3 COILOVERS

UPGRADE DAMPERS

Audi TTS TT RS coilovers.Aftermarket coilovers are a superb upgrade for fast road and track-focused 8V S3 and RS3 models. We recommend systems from manufacturers such as KW, Moton and Öhlins.

The 2-way KW V3 Coilovers feature independent compression and rebound adjustment. These 2-way adjustable TTS/TT RS coilovers increase chassis response, reduce body roll, and improve overall balance for road and track driving.

2-way Coilovers Benefits:

  • Independent bump and rebound tuning
  • Improves handling, grip and body control
  • Offers ride height adjustment
  • Suitable for the road and track
Once professionally set up, coilovers help the tyres maintain more consistent contact with the road and track, improving the Boxster's handling performance. 


KW V4 Clubsport Coilovers


Audi TTS TT RS 3-way coilovers.

For Audi TTS and TT RS owners searching for the ultimate coilover system for track driving, look no further than 3-way KW V4 Clubsport Coilovers.

KW V4 Clubsport coilovers for the TTS and TT RS feature low- and high-speed bump adjustment, plus rebound adjustment. Three-way adjustable coilovers allow you to control grip level, chassis balance, comfort level and stability - independently of each other. This is why they're used in professional motorsport.

How 3-way Coilovers Work
Rebound: How fast the suspension extends after compression
Low-speed compression: Affects handling balance
High-speed compression: Affects ride quality and grip over bumps

Aftermarket coilovers also allow you to adjust front and rear ride heights. Once professionally set up, coilovers help the tyres maintain more consistent contact with the road, improving handling performance. 


Audi TTS & TT RS Suspension FAQs

Will suspension upgrades reduce understeer?
Yes. Increasing front camber with adjustable camber plates significantly improves front-end grip and reduces understeer during fast cornering.

Are camber plates enough on their own?
Camber plates deliver noticeable gains, but pairing them with quality coilovers further improves balance, body control and overall handling precision.

What do adjustable coilovers improve?
They enhance chassis response, reduce body roll, improve grip consistency and allow ride height and damping adjustment for road or track use.

Do I need a geometry alignment after fitting parts?
Absolutely. A professional alignment ensures camber, toe and caster are correctly set to maximise grip, stability and tyre life.

Will upgraded suspension affect ride comfort?
When correctly specified and set up, adjustable suspension can retain good road comfort while delivering much sharper handling.


Tested and developed by Suspension Secrets through extensive road and track evaluation, these upgrades unlock the full potential of the Audi TTS and TT RS (FV/8S).